Marvell Semiconductor, Inc. 88E3018-A2-NNC1I000
| Parameters | |
|---|---|
| Series | Alaska® |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| RoHS Status | ROHS3 Compliant |
| Package / Case | 64-VFQFN Exposed Pad |
| Mfr | Marvell Semiconductor, Inc. |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Type | Transceiver |
| Data Rate | 10Mbps, 100Mbps |
| Supplier Device Package | 64-QFN (9x9) |
| Voltage - Supply | 1.14V ~ 1.26V, 2.38V ~ 2.62V, 3.14V ~ 3.46V |
| Protocol | IEEE 1149.1, IEEE 802.3 |
| Number of Drivers/Receivers | 4/4 |
| Duplex | Full, Half |
| Package | Tray |
| Product Status | Active |
| REACH Status | REACH Unaffected |
| Other Names | 2208-88E3018-A2-NNC1I000 |
| Standard Package | 260 |
| ECCN | 5A991B1 |
| HTSUS | 8542.39.0001 |
The 88E3018-A2-NNC1I000 is a part of the Marvell® 88E3015/88E3018 series, which are fourth-generation DSP-based physical layer transceivers designed for Fast
Ethernet applications. These devices are equipped to convert data streams between a Media Access Controller (MAC) and the physical media, supporting both
100BASE-TX and 10BASE-T networks over twisted-pair cable in full-duplex or half-duplex mode. They also support the Reduced Gigabit Media Independent Interface
(RGMII) and the Media Independent Interface (MII). The 88E3018 specifically offers a pin-upgradeable path toward future Gigabit Ethernet PHY designs and includes
support for IEEE 1149.1 JTAG Standard Test Access Port and Boundary Scan. It is available in Industrial grade (RoHS 6/6 compliant package only) .
88E3018-A2-NNC1I000 Features:
- Compliance with IEEE 802.3u standard for 100BASE-TX and 10BASE-T ports
- Support for RGMII and MII interfaces
- Virtual Cable Tester® (VCT™) Technology for remote cable plant analysis
- Automatic MDI/MDIX crossover functionality
- Far-End Fault Indication (FEFI) for 100BASE-FX applications
- Energy detect feature and baseline wander correction
- Auto-Calibration for MAC Interface outputs
- Flexible serial management interface (MDC/MDIO) for register access
- Programmable interrupt to minimize polling
- Support for up to three LEDs per port for status indication
- Available in both 56-pin QFN (88E3015) and 64-pin QFN (88E3018) packages
- Industrial grade package option for the 88E3018 device
88E3018-A2-NNC1I000 Applications:
- Industrial automation systems requiring reliable network communication
- Instrumentation equipment that demands high-precision rotation measurement
- Platform stabilization systems in drones, camera stabilizers, and marine stabilization
- Flight control systems in aerospace applications
- Research and development applications for measuring rotational dynamics
- Automotive electronics for stability control systems (e.g., ESP)
- General-purpose electronic circuits, including sensor interfaces, measuring instruments, and power management solutions
