Microchip Technology AT21CS01-STUM10-T

AT21CS01-STUM10-T


  • Manufacturer: Microchip Technology
  • CONEVO NO: AT21CS01-STUM10-T
  • Package: TO-236-3, SC-59, SOT-23-3
  • Datasheet: PDF
  • Stock: In stock
If you need to check our product or price list, please leave your email and we will contact you within 24 hours. Clicking on the website skype will result in a faster response!

Details

Tags

Parameters
HTSUS 8542.32.0051
Series -
Moisture Sensitivity Level (MSL) 1 (Unlimited)
RoHS Status ROHS3 Compliant
Package / Case TO-236-3, SC-59, SOT-23-3
Mfr Microchip Technology
Mounting Type Surface Mount
Operating Temperature -40°C ~ 85°C (TC)
Technology EEPROM
Supplier Device Package SOT-23-3
Memory Size 1Kbit
Memory Type Non-Volatile
Voltage - Supply 1.7V ~ 3.6V
Clock Frequency 125 kbps
Memory Organization 128 x 8
Memory Format EEPROM
Memory Interface I²C, Single Wire
Write Cycle Time - Word, Page 5ms
Package Tape & Reel (TR)
Product Status Active
Base Product Number AT21CS01
REACH Status REACH Unaffected
Standard Package 5,000
ECCN EAR99

The AT21CS01-STUM10-T is a 1-Kbit (128 x 8-bit) single-wire serial EEPROM manufactured by Microchip using an I2C protocol architecture that supports both standard 

speed (15.4 kbps) and high-speed (125 kbps) modes. It only needs two pins to operate: SI/O and GND. The SI/O signal is a combination of data and power lines that 

provide power to the device, using a parasitic power supply scheme. The AT21CS01-STUM10-T device consists of 128 words with 8 bits each and is optimized for use in consumer and 

industrial applications where reliable non-volatile storage is required. In addition, it has a 256-bit security register, including a unique 64-bit serial number.

AT21CS01-STUM10-T Features:

- 128 x 8 (1 Kbit) storage capacity

- Supports the I²C protocol

- Self-timed erase and write cycles, up to 5 milliseconds

- Communication via a single I/O pin

- Support standard speed (15.4 kbps) and high speed (125 kbps) modes

- The typical reading current is 0.08 mA, and the maximum reading current is 0.3 mA

- The typical write current is 0.2 mA and the maximum is 0.5 mA

- The typical value of standby current is 0.7 uA, and the maximum value is 2.5 uA

- Provides data retention for more than 1 million years

- ESD protection over 8000V (HBM)

AT21CS01-STUM10-T Application:

This EEPROM provides a flexible data storage solution, especially for applications that require data to be maintained without the use of power. The AT21CS01-STUM10-T 

can be used in a variety of applications, including but not limited to:

· Analog sensor calibration data storage.

· Identification of ink cartridges and toner printers.

· Manage aftermarket consumables.

· Other situations where small amounts of non-volatile storage are required.

Contact Information
close